SETUP VESTA CAMERAS 291-292-293

The Vesta 291, 292, and 293 series are a range of wireless security cameras designed for both indoor and outdoor use. They provide reliable video surveillance with easy installation.

We will show how to add the camera Vesta-292, but the steps to add the camera Vesta-291 or Vesta-293 are similar

Camera 292

STEP 1: Plug the power cable

STEP 2: Wait for the LED to remain in solid GREEN colour for Ethernet connection or flashing GREEN in case of Wi-Fi Setup

Use the SmartHomeSec app to initialise the camera and add it to the system

STEP 1 STEP 2 STEP 3

STEP 1: Login as User in the SmarthomeSec App

STEP 3: Press + Icon to add a camera

STEP 4 STEP 5

STEP 4: Press the VESTA/Imou icon

STEP 5: Scan the Camera QR code and press NEXT

STEP 6: Select how to add the camera:

  • Add to the equipment: The camera must be installed on the same panel LAN network. In this way, the camera will be fully supported in the panel and the user app.

STEP 6
  • Add to the cloud: The camera will be installed using the cloud. The user will see the live video only from the user's app account.

STEP 7: Choose the communication path of the camera (Ethernet or Wi-Fi)

STEP 7

In case of Ethernet communication, jump directly to STEP 12

STEP 8: Wi-Fi connection

STEP 8 STEP 9 STEP 10

STEP 9: Connect your mobile to the camera network by pressing join

STEP 10: Select the network and press Next

STEP 11 STEP 12 STEP 13

STEP 11: Write the Wi-Fi password

STEP 12: The app will show you the camera userID and password

STEP 12
Password

SETUP COMPLETED

TROUBLESHOOTING

I cannot find the IP of the camera on the setup steps:

1. Ensure that the VESTA central controller is connected to the same network as the camera.

2. Restart the switch or router where the VESTA panel and Camera are connected.


I cannot complete the setup via WIFI

1. Check that you have the latest firmware in the VESTA control unit.

2. Make sure to enable the location for the SmartHomeSec APP.

3. Make sure you give the APP permissions to connect to a WIFI network, and if it asks for connection permissions allow them.


The camera is not ready:

  1. Reset the camera to factory settings

To reset the VESTA camera: Press the button RESET located on the back and hold for 10 seconds (The camera will make a BEEP and the LED will turn red) NOTES: In the VESTA-292 model, the button is located under the optics

Last updated

Was this helpful?