VESTA-349N

SMS COMMAND TABLE

QUICK GUIDE

1

Send SMS to VCP with phone number you want to call

RPT:PROG,1111,3,TELEPHONE,3,0,0,4

2

Add to VESTA panel (Only VESTA-349N)

Put panel in learn mode and press help button in VESTA-349N

Device button and led indicator

---

Manual for Learning and Removing RF Devices on VESTA-341N

Entering Learning Mode

1. Press and hold the Alarm Button on VCPP for 8 seconds.

2. At the 8th second, the device will emit one beep.

3. Release the button immediately after the beep to enter learning mode.

---

Device Learning and Testing

1. Press the Button on the RF device to transmit signals. (Refer to the RF device manual for specific details.)

2. VCP will emit 2 beeps when it successfully receives the signal from the RF device (bracelet/pendant), confirming that it has been learned.

3. Repeat Steps 1-2 to learn additional devices.

4. Verification:

   • To ensure correct reception at all key locations, verify that the hands-free unit emits a confirmation tone when pressing the bracelet/pendant button.

5. Once all devices are learned, press the Alarm Button on VCP once to exit learning mode.

   • The device will emit 2 beeps to confirm exit.

---

Device Removal

1. While in learning mode, press the Alarm Button twice quickly.

2. VCP will emit 2 beeps, indicating that ALL RF devices have been removed.

3. The device will automatically exit learning mode after removal.