# VESTA-341N
STCB-1-LTE-E F1 868
## Voice emergency call point
### SMS COMMAND TABLE
### QUICK GUIDE
{% stepper %}
{% step %}
Send SMS to VCP with phone number you want to call
RPT:PROG,1111,3,TELEPHONE,3,0,0,4
{% endstep %}
{% step %}
Add to VESTA panel (Only VESTA-349N)
Put panel in learn mode and press help button in VESTA-349N
{% endstep %}
{% endstepper %}
### Device button and led indicator
***
{% hint style="info" %}
## **Manual for Learning and Removing RF Devices on VESTA-341N**
### **Entering Learning Mode**
1. Press and hold the **Alarm Button** on VCPP for **8 seconds**.
2. At the **8th second**, the device will emit **one beep**.
3. Release the button immediately after the beep to enter **learning mode**.
***
### **Device Learning and Testing**
1. **Press the Button** on the RF device to transmit signals. *(Refer to the RF device manual for specific details.)*
2. **VCP will emit 2 beeps** when it successfully receives the signal from the RF device (bracelet/pendant), confirming that it has been learned.
3. **Repeat Steps 1-2** to learn additional devices.
4. **Verification:**
* To ensure correct reception at all key locations, verify that the **hands-free unit emits a confirmation tone** when pressing the **bracelet/pendant button**.
5. Once all devices are learned, **press the Alarm Button** on **VCP once** to exit learning mode.
* The device will emit **2 beeps** to confirm exit.
***
### **Device Removal**
1. While in **learning mode**, press the **Alarm Button twice quickly**.
2. **VCP will emit 2 beeps**, indicating that **ALL RF devices** have been removed.
3. The device will automatically **exit learning mode** after removal.
{% endhint %}
***
### **Device Learning and Testing**
1. **Press the Button** on the RF device to transmit signals. *(Refer to the RF device manual for specific details.)*
2. **VCP will emit 2 beeps** when it successfully receives the signal from the RF device (bracelet/pendant), confirming that it has been learned.
3. **Repeat Steps 1-2** to learn additional devices.
4. **Verification:**
* To ensure correct reception at all key locations, verify that the **hands-free unit emits a confirmation tone** when pressing the **bracelet/pendant button**.
5. Once all devices are learned, **press the Alarm Button** on **VCP once** to exit learning mode.
* The device will emit **2 beeps** to confirm exit.
***
### **Device Removal**
1. While in **learning mode**, press the **Alarm Button twice quickly**.
2. **VCP will emit 2 beeps**, indicating that **ALL RF devices** have been removed.
3. The device will automatically **exit learning mode** after removal.
{% endhint %}