VESTA ADVANCED IP CAMERA SERIES
Last updated
Was this helpful?
Last updated
Was this helpful?
To update the camera, follow these steps:
Download the Firmware: Ensure you download the firmware that matches your camera model from the following list according to your model:
IPC-T38-ZAS-PV-B
IPC-T38-ZAS-PV
IPC-B38-ZAS-PV-B
IPC-B38-ZAS-PV
IPC-T35-AS-PV-B
IPC-T35-AS-PV
IPC-B35-AS-PV-B
IPC-B35-AS-PV
IPC-D24-ZAS-L-B
IPC-D24-ZAS-L
IPC-T24-L
IPC-B24-L
Navigate to Setup: Go to 'Setup' in the menu.
Select System: Choose 'System' from the options.
Choose Upgrade: Proceed to 'Upgrade' to begin the firmware update process.
Network Verification: Ensure that both the VESTA panel and the camera are connected to the same network.
SmartHomeSec APP Setup:
Open the app and log in using your Master account credentials.
Navigate to the "Cameras" section and select "VESTA ADVANCED."
Camera Scanning:
The system will begin scanning for new cameras on the network automatically.
Camera Selection:
Choose the camera from the list, and input the username and password. Use the same credentials you use for accessing the camera's web server locally.
Enable Continuous Recording on MicroSD
Storage Configuration:
Navigate to the Storage section.
Select Destination and ensure Scheduled is enabled.
In Scheduled make sure to enable 24h all days or needed days
Quick login to local portal:
Step 1: Open a browser, enter the device’s IP address in the address bar (the default IP address is 192.168.1.86), and press Enter.
Step 2: Enter the username and password; the default user name of the device is “admin”.
Step 3: When logging in to the device for the first time, the system will pop up a “Change Password” prompt. Please change the administrator password on time and safe-keep it.
Reset Password: If the user forgets the password, click Reset Password to get a key. After the customer sends this key to our technician, our technician will generate a new decoding key for the user, and the password will be reset to the default password “123456”.
More information will be added soon
: Navigate to the camera's local interface (Default IP: 192.168.1.86).