# VESTA-239
ZBW-DONGLE
## Z-Wave and Zigbee dongle
The ZBW Dongle has built in both ZigBee and Z-Wave modules to provide the Control Panel with extra ZigBee and Z-Wave compatibility. It enables the Control Panel to learn in and control ZigBee and Z-Wave devices.
## **Identifying the Parts**
**1. Blue/Red LED**
Blue LED ON: Normal Operation for ZigBee Network
Red LED ON: Normal Operation for Z-Wave network
## **Operation**
1. Power down the Control Panel.
2. Plug the ZBW Dongle into the USB port on the Control Panel.
3. Power on the Control Panel.
4. If the ZBW Dongle is detected by Control Panel, the “**Exclusion**” and “**Z-Wave Rese**t” features will be displayed under **Device Management** on the website configuration page. (For Z-Wave Network Only) Select “Z-Wave Reset” and click “Yes” to reset ZBW Dongle.
5. Refer to Control Panel installation manual and individual ZigBee or Z-wave device manual to learn in and control your ZigBee/Z-wave devices.
{% hint style="warning" %}
Note:
Do **NOT** plugin/unplug the ZBW dongle into Control Panel when the panel is powered on.
{% endhint %}
---
# Agent Instructions: Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter:
```
GET https://vesta-guide.gitbook.io/vesta-guide/vesta-239.md?ask=
```
The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.