# VESTA-240
ZW-DONGLE
## **Z-Wave Dongle**
Z-Wave Dongle designed to be used with Climax gateways to provide extra Z-wave device compatibility. It enables the Control Panel to learn in and interact with various Z-wave devices on the market.
## **Identifying the Parts**
1. **Blue LED**
LED ON: Working Normally
## **Operation**
1. Power down the Control Panel
2. Plug the Z-wave Dongle into the USB port on the Control Panel
3. Power on the Control Panel
4. If the Z-Wave Dongle is detected by control panel, the “**Exclusion**” and “**Z-Wave Reset**” features will be displayed under **Device Management** in the website configuration page.
5. Select “Z-Wave Reset” and click “**Yes**” to reset Z-wave dongle.
5. Refer to Control Panel installation manual and individual Z-wave device manual to learn in and control your Z-wave devices.
{% hint style="warning" %}
Note:
Do **NOT** plugin / unplug the Z-wave dongle into Control Panel when the panel is powered on.
{% endhint %}
---
# Agent Instructions: Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter:
```
GET https://vesta-guide.gitbook.io/vesta-guide/vesta-240.md?ask=
```
The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.