VESTA-441
OUTDOOR SOLAR POWER SUPPLY SYSTEM
Last updated
Was this helpful?
OUTDOOR SOLAR POWER SUPPLY SYSTEM
Last updated
Was this helpful?
With efficient Mono solar panel and high-capacity LifePO4 battery, VESTA solar power supply system delivers constant power to outdoor equipment such as network bridges and cameras. Perfect for areas where network and power deployment is tough, it eradicates wiring hassles and cuts investment costs.
Solar panel x 1
Cylinder Bracket x 1
Hoop x 2
Camera mounting plate x 1
Solar panel round tube support x 1
Aircraft screw x 3
Crosshead screw x 1
Square head screws x 4
Expansion screw x 4
One by three DC 12V x 1
Find the round tube support and fix it to the screw holes of the I-frame/U-shaped frame of the solar panel with four square screws.
Pole installation: Insert the two straps respectively into the upper and lower holes at the bottom of the battery bin (note: the upper and lower holes are 4), find the fixed position of the pole, tighten the arms and fix them firmly.
Wall hanging installation: Use a marker to find four holes on the wall, drill holes with an electric drill, and secure them with expansion bolts (two on each side).
Install solar panels: After the battery compartment is fixed, install the solar panels equipped with the round tube bracket, and find a good angle in the way of docking installation (note: the orientation of the battery compartment panel and solar panels must be the sunny side — due south/south to east/south to west; north installation is invalid), and fix it with 3 aircraft screws.
Precautions:
The photovoltaic panel cannot be connected to other power sources or unmatched devices to avoid damage.
Photovoltaic panels and related devices should be firmly fixed to prevent falling due to wind.
Do not disassemble the product yourself, as it may affect maintenance (contains lithium battery, which must be recycled properly).
After full charge, battery can support 2–3 rainy days.
To forcibly shut down, press the “O” key of the switch — system stops working.
To start, press the switch; indicator turns green, and system begins operating.
Common faults and repairs:
Check if the switch is on
Check if the indicator light is green
Check connection lines or water ingress
Check if the panel and cables are connected properly
For issues, contact after-sales support
Website: