VESTA 354

1. Identifying the Parts

Screen

2. Package Content

Touchscreen Keypad *1 Mounting Bracket *1 Machine Screw *1

Self-tapping Screws for Mounting Bracket *2 Wall Plugs for Self-tapping Screws *2

3. Power Supply

TSP-1-BUS can be powered by either the Hybrid Panel via BUS connection or the external power supply via the 12V AC-DC adaptor.

4. Equipment required

A router supporting 2.4 GHz Wi-Fi network is required for “WIFI” or “WIFI & BUS” operation. The Hybrid Panel should be connected to this router with access to the Internet.

5. Bus Wiring of Touchscreen Keypad

Before connecting the Touchscreen Keypad to the system bus, please switch the power off.

To assist with cable connection, the terminal blocks on each BUS module are color-coded.

TSP-1-BUS will be automatically turned on after power is supplied.

Hybrid Panel

DC 12V/GND:

connect to external power supply

1

6. Setup and Connection

TSP-1-BUS can operate in three different modes: “”WIFI & BUS”, “WIFI”, or “BUS”.

Learning Process is only required for the first-time setup.

Step 1. After TSP-1-BUS is wired to the Panel, select the language and then connection mode for the Keypad.

Step 2. For “WIFI & BUS” and “WIFI” connection, select the WIFI SSID of the router to which the Panel is connected.

Enter the WiFi network password if required and click “OK”.

For “BUS” connection, you will enter the Home page directly.

Step 3. Put your Hybrid Panel into learning mode (refer to Panel’s user manual for details).

Step 4. For “WIFI & BUS” and “WIFI” connection, your Touchscreen Keypad will automatically search for available Panels. Select the Panel you’d like to access.

For “BUS” connection, the Touchscreen Keypad will be automatically displayed on the Panel’s webpage.

Step 5. On the Panel’s webpage, click “Add” to include the Touchscreen Keypad into the Panel.

Step 6. The Touchscreen Keypad will be displayed as Keypad in “Learned Device” section if the learning is successful.

7. Hardware Installation

The Touchscreen Keypad is designed to be mounted on the wall with the wall mounting bracket provided.

Step 1. Use the two mounting holes on the bracket as a template to drill holes into the wall to be mounted.

Step 2. Insert the wall plugs if the Keypad is to be fixed onto plaster or bricks.

Step 3. Screw the bracket onto the wall with the 2 screws provided.

Step 4. Attach the Touchscreen Keypad onto the mounting bracket.

Step 5. Tighten the machine screw to firmly fix the Keypad onto the mounting bracket.

For more detailed instruction, please scan the QR Code and download “TSP-1-BUS Touchscreen Keypad Installation Guide”.

2