ZBW Dongle
The ZBW Dongle has built in both ZigBee and Z-Wave modules to provide the Control Panel with extra ZigBee and Z-Wave compatibility. It enables the Control Panel to learn in and control ZigBee and Z-Wave devices.
Identifying the Parts
1. Blue/Red LED
Blue LED ON: Normal Operation for ZigBee Network
Red LED ON: Normal Operation for Z-Wave network
Operation
Power down the Control Panel.
Plug the ZBW Dongle into the USB port on the Control Panel.
Power on the Control Panel.
If the ZBW Dongle is detected by Control Panel, the “Exclusion” and “Z-Wave Reset” features will be displayed under Device Management on the website configuration page. (For Z-Wave Network Only) Select “Z-Wave Reset” and click “Yes” to reset ZBW Dongle.
Refer to Control Panel installation manual and individual ZigBee or Z-wave device manual to learn in and control your ZigBee/Z-wave devices.
<NOTE>
Do NOT plugin/unplug the ZBW dongle into Control Panel when the panel is powered on.
