# VESTA-349N
VCP-LTE-E-S F1 868
## Voice Emergency Call Point
This device can be added to a panel via F1 and allows GSM calls to be made from Rules. It includes the ability to make phone calls by pressing the ‘HELP’ button
## SMS COMMAND TABLE
## QUICK GUIDE
{% stepper %}
{% step %}
Send SMS to VCP with phone number you want to call
RPT:PROG,1111,3,TELEPHONE,3,0,0,4
{% endstep %}
{% step %}
Add to VESTA panel (Only VESTA-349N)
Put panel in learn mode and press help button in VESTA-349N
{% endstep %}
{% endstepper %}
### Device button and led indicator
***
{% hint style="info" %}
## **Manual for Learning and Removing RF Devices on VESTA-341N**
### **Entering Learning Mode**
1. Press and hold the **Alarm Button** on VCPP for **8 seconds**.
2. At the **8th second**, the device will emit **one beep**.
3. Release the button immediately after the beep to enter **learning mode**.
***
### **Device Learning and Testing**
1. **Press the Button** on the RF device to transmit signals. *(Refer to the RF device manual for specific details.)*
2. **VCP will emit 2 beeps** when it successfully receives the signal from the RF device (bracelet/pendant), confirming that it has been learned.
3. **Repeat Steps 1-2** to learn additional devices.
4. **Verification:**
* To ensure correct reception at all key locations, verify that the **hands-free unit emits a confirmation tone** when pressing the **bracelet/pendant button**.
5. Once all devices are learned, **press the Alarm Button** on **VCP once** to exit learning mode.
* The device will emit **2 beeps** to confirm exit.
***
### **Device Removal**
1. While in **learning mode**, press the **Alarm Button twice quickly**.
2. **VCP will emit 2 beeps**, indicating that **ALL RF devices** have been removed.
3. The device will automatically **exit learning mode** after removal.
{% endhint %}
---
# Agent Instructions: Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter:
```
GET https://vesta-guide.gitbook.io/vesta-guide/vesta-349n.md?ask=
```
The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
***
### **Device Learning and Testing**
1. **Press the Button** on the RF device to transmit signals. *(Refer to the RF device manual for specific details.)*
2. **VCP will emit 2 beeps** when it successfully receives the signal from the RF device (bracelet/pendant), confirming that it has been learned.
3. **Repeat Steps 1-2** to learn additional devices.
4. **Verification:**
* To ensure correct reception at all key locations, verify that the **hands-free unit emits a confirmation tone** when pressing the **bracelet/pendant button**.
5. Once all devices are learned, **press the Alarm Button** on **VCP once** to exit learning mode.
* The device will emit **2 beeps** to confirm exit.
***
### **Device Removal**
1. While in **learning mode**, press the **Alarm Button twice quickly**.
2. **VCP will emit 2 beeps**, indicating that **ALL RF devices** have been removed.
3. The device will automatically **exit learning mode** after removal.
{% endhint %}
---
# Agent Instructions: Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter:
```
GET https://vesta-guide.gitbook.io/vesta-guide/vesta-349n.md?ask=