IPC-B32-OUT-WF Firmware Update Guide

This guide explains how to update the firmware of your VESTA IPC-B32-OUT-WF camera using VESTA Tool.

The firmware update fixes the following points:

• Improves WiFi scanning

• Enables Human Detection activation from SmartHomeSec APP

The update process only takes a few minutes.

---

Before You Start

Make sure you have:

• A PC with VESTA Tool installed

• The firmware file provided in this guide

9MB

Vesta_Home_Eng_P_SSV6355_V2.801.00BY001.0.R.260309.bin

Open

• Your camera powered on and connected to the network

• The Verification Code (printed on the label of the camera)

---

Update in 3 Simple Steps

Step 1 — Open VESTA Tool

1. Launch VESTA Tool on your computer.

2. Go to Search Settings.

3. Enter the Verification Code shown on the camera label.

4. Click Search to detect the camera on your network.

---

Step 2 — Open the Upgrade Section

1. Select your IPC-B32-OUT-WF camera from the device list.

2. Click Upgrade in the VESTA Tool interface.

---

Step 3 — Upload the Firmware

1. Click Browse / Select File.

2. Choose the firmware file (.bin) provided in this guide.

3. Click Upgrade.

The update process will start automatically.

---

Important Notes

• Do not disconnect power during the upgrade.

• The camera may restart automatically once the update is complete.

• The upgrade typically takes 2–3 minutes.

---

After the Update

Once the update is finished, your camera will include:

• Improved WiFi network scanning

• Human Detection activation support

Its recomended to factory default de IP cam using its button after the update.